VISIT

Plan an in-person visit

SUPPORT

The Center needs you

SHOP

Browse our online store

1.69.3683
Gomph | French edger | metal...
add to galleryremove from gallery

1.69.3683 | L: 6.75 in, Diameter: 1.25 in | Gift of Mr. Victor Alexander, Jr. | On metal end: GOMPH/0 | French edger. Metal end of tool is attached to a round, hard, wood handle with a brass ferrule. Inscription on metal end. See Gomph catalog, pg 9. | 1.69.3683.JPG | French edger | metal | wood | brass | Gomph

1.69.3690
Gomph | edger, french | meta...
add to galleryremove from gallery

1.69.3690 | L: 6 in, Diameter: 1 in | Gift of Mr. Victor Alexander, Jr. | On metal end: GOMPH/4 [embossed on handle:] CB | Flat French edger. Metal end of tool is attached to a round, hard, wood handle with a brass ferrule. Inscription on metal end and embossed on handle. See Gomph catalog, pg 8. | 1.69.3690.JPG | edger, french | metal | brass | wood | Gomph

1.69.3688
Gomph | French edger | brass...
add to galleryremove from gallery

1.69.3688 | L: 7 in, Diameter: 1.25 in | Gift of Mr. Victor Alexander, Jr. | On metal end: GOMPH/8 | French edger. Metal end of tool is attached to a round, hard, wood handle with a brass ferrule. Inscription on metal end. See Gomph catalog, pg 9. | 1.69.3688.JPG | French edger | brass | metal | wood | Gomph

1.69.2951
Gomph | edger | brass | meta...
add to galleryremove from gallery

1.69.2951 | L: 6 in, Diameter: 1 in | Gift of Mr. Victor Alexander, Jr. | PAT. MAY 5/'68 GOMPH [inscription on side of brass head:] AB | Edge Channeler. Brass tool head attached to dark, wooden, round handle. Brass head has pointed blade running through it at 45 [symbol for degree] angle. The head screws onto brass length that sticks out of handle. A screw adjusts slanted block under blade adjusting the blade's angle. Inscription on slanted brass piece and on side of brass head. Leather piece nailed into wooden handle with slit for hanging tool. Used to make diagonal slit in edge of leather. Prob. used in harness-making. See Gomph catalog, pg. 7. | 1.69.2951.JPG | edger | brass | metal | leather | wood | Gomph

1.69.2901
Gomph | pricking wheel | bra...
add to galleryremove from gallery

1.69.2901 | L: 6 in, depth: 1.25 in | Gift of Mr. Victor Alexander, Jr. | on metal tip: GOMPH (vertically [along another side]): 5 (stamped or embossed figures [on wooden handle]): M | Over Stitch Wheel. The metal wheel has 7 tips on the wheel. The wheel end is metal attached to a hard-wood handle by a brass ferrule. Inscription on metal tip. Stamped or embossed figures on wood handle. Used to run over stitches for a more even appearance. See Gomph catalog, pg. 4. | 1.69.2901.JPG | pricking wheel | brass | metal | wood | Gomph

1.69.3612
Gomph | edge channeler | lea...
add to galleryremove from gallery

1.69.3612 | L: 5.5 in, Diameter: 1 in | Gift of Mr. Victor Alexander, Jr. | On brass head: PAT.MAY 5/68/GOMPH [embossed on handle:] IH/HI [on opposite side head:] AB | Edge channeler. Brass headed tool with flat sides. A small blade set in head at a 45 degree angle with screws to adjust block below blade. Brass head attached to stem and round, wooden handle with brass ferrule. Leather tab tacked into bottom of handle. Inscription on brass head and opposite side of head. Embossed in handle. Used to cut diagonal slit in edge of leather. Probably used in harness making. See Gomph catalog, pg 7. | 1.69.3612.JPG | edge channeler | leather | wood | brass | Gomph

1.69.3011
Gomph | French edger | metal...
add to galleryremove from gallery

1.69.3011 | L: 6.25 in, Diameter: 1.25 in | Gift of Mr. Victor Alexander, Jr. | on top of metal end: GOMPH/3 [on wood handle]: "M" and "N.U." | French Edger. Metal end of tool has 2 points with metal blade between them 1/4" wide. Metal end of tool is attached to round, hard-wood handle with brass ferrule. Inscription on top of metal end and on wood handle. See Gomph cataloge, pg. 9. | 1.69.3011.JPG | French edger | metal | brass | wood | Gomph

1.69.2852
Gomph | creaser | wood | bra...
add to galleryremove from gallery

1.69.2852 | L: 5.5 in, Diameter: 1.25 in | Gift of Mr. Victor Alexander, Jr. | on metal tip: GOMPH | Hard-wood rounded, handle; brass ferrule and metal end, curved tip. Tip is split in the middle - creating two ridges. Inscription on metal tip. See Gomph catalog pg. 6. | 1.69.2852.JPG | creaser | wood | brass | Gomph

1.69.3610
Gomph | channeler | leather ...
add to galleryremove from gallery

1.69.3610 | L: 5.75 in, Diameter: 1 in | Gift of Mr. Victor Alexander, Jr. | On brass head: PAT. MAY 5/68/GOMPH | Edge channeler. Brass headed tool with square sides with a blade set in head at a 45 degree angle with screw to adjust block below blade. Inscription on brass head. Brass head attached to metal stem by metal threads. Metal stem attached to dark, round, wooden handle with brass ferrule. Leather tab tacked onto bottom of handle for hanging. Used to make diagonal slit in edge of leather. Probably used in harness making. See Gomph catalog, pg 7. | 1.69.3610.JPG | channeler | leather | brass | metal | wood | Gomph

1.69.2906
Gomph | wheel, over stitch |...
add to galleryremove from gallery

1.69.2906 | L: 6 in, depth: 1 in | Gift of Mr. Victor Alexander, Jr. | on metal tip: GOMPH [stamped or embossedfigures on wooden handle: M & M | Saddle maker's tool. The metal wheel has 9 tips on the wheel. the wheel end is metal attached to a hardwood handdle by a brass ferrule. Inscription on metal tip and wooden handle. Tool used to go over stitches for a more even appearance. See Gomph catalog p. 4. | 1.69.2906.JPG | wheel, over stitch | wood | brass | metal | Gomph

1.69.3529
Gomph | French edger | iron ...
add to galleryremove from gallery

1.69.3529 | L: 6.75 in | Gift of Mr. Victor Alexander, Jr. | on neck: GOMPH/ 1 1/2 | Tool head is sharpened in the middle, with outside guides along edges. | 1.69.3529.JPG | French edger | iron | wood | Gomph

1.69.3092
Gomph | punch, strap end | m...
add to galleryremove from gallery

1.69.3092 | L: 6 in, Diameter: 1.25 in | Gift of Mr. Victor Alexander, Jr. | on top of metal: GOMPH (vertically) 5/8 [on bottom of metal end]: AB | Strap end punch. Half-round U-shaped blade 1" long. Metal end of tool is attached to a dark, round, hard wood handle with a brass ferrule. Inscription on top of metal and on bottom of metal end. Meant to be used in hand and not hammered. See Gomph catalog, pg. 3. | 1.69.3092.JPG | punch, strap end | metal | brass | wood | Gomph

1.69.2849
Gomph | creaser | wood | bra...
add to galleryremove from gallery

1.69.2849 | L: 5.5 in, depth: 1.25 in | Gift of Mr. Victor Alexander, Jr. | on metal tip: GOMPH [vertically]: 3 [stamped or embossed figures on wood handle]: 23/M | Hard-wood rounded, handle; brass ferrule and metal end, curved tip. Tip is split in the middle - creating two ridges. Inscription on metal tip. See Gomph catalog pg. 6. | 1.69.2849.JPG | creaser | wood | brass | Gomph

1.69.2866
Gomph | creaser | wood | bra...
add to galleryremove from gallery

1.69.2866 | L: 5.25 in, depth: 1.25 in | Gift of Mr. Victor Alexander, Jr. | on metal tip: GOMPH (vertically): 3 | Hard-wood rounded, handle; brass ferrule and metal end, curved tip. Tip is split in the moddle - creating two ridges. Inscription on metal tip. See Gomph catalog, pg. 6. | 1.69.2866.JPG | creaser | wood | brass | metal | Gomph

1.69.2853
Gomph | creaser | brass | wo...
add to galleryremove from gallery

1.69.2853 | L: 5.5 in, depth: 1 in | Gift of Mr. Victor Alexander, Jr. | on metal tip: GOMPH [vertically]: 4 | Hard-wood rounded, handle; brass ferrule and metal end, curved tip. Tip is split in the middle - creating two ridges. Inscription on metal tip. See Gomph catalog, pg. 6. | 1.69.2853.JPG | creaser | brass | wood | Gomph

1.69.2875
Gomph | creaser | wood | bra...
add to galleryremove from gallery

1.69.2875 | L: 5.5 in, depth: 1.25 in | Gift of Mr. Victor Alexander, Jr. | on metal tip: GOMPH; (vertical): 2 | Hard-wood rounded, handle; brass ferrule and metal end, curved tip. Tip is split in the middle - creating two ridges. Inscription on metal tip. See Gomph catalog, pg. 6 | 1.69.2875.JPG | creaser | wood | brass | metal | Gomph

1.69.2931
Gomph | strap end punch | br...
add to galleryremove from gallery

1.69.2931 | L: 6 in, Diameter: 1 in | Gift of Mr. Victor Alexander, Jr. | on top front of metal running horizontally: GOMPH [above this running vertically]: 1/2 GOMPH [on back of end]: AB | Half-round metal tipped, U-shaped head with sharp edge on end. Metal end is attached with brass ferrule to wooden handle. Inscription on front of metal, on back of end. Meant to be used in hand & not hammered. See Gomph catalog, pg 3. | 1.69.2931.JPG | strap end punch | brass | wood | metal | Gomph

1.69.3333
Gomph | bag or oblong punch ...
add to galleryremove from gallery

1.69.3333 | L: 4.125 in, width: 1.625 in, H: .5 in | Gift of Mr. Victor Alexander, Jr. | On flat square end: GOMPH/L/L/8 | Bag or oblong punch. Used for leather bag and harness staps. Solid metal punch with square sided handle and hollow, square shaped pocket with oblong shape punch on opposite end. Inscription on flat square end. See Gomph catalog, pg 3. | 1.69.3333.JPG | bag or oblong punch | metal | Gomph

1.69.2937
Gomph | strap end punch | wo...
add to galleryremove from gallery

1.69.2937 | L: 6.5 in, Diameter: 1 in | Gift of Mr. Victor Alexander, Jr. | on top front of metal vertically: 1 1/4 [horizontally]: GOMPH [back side of end puncher metal head]: AB | Half-round. Metal tipped, U-shaped-head with sharp edge on end. Metal end is attached with brass ferrule to wooden handle. Inscription on top front of metal and side of end. Meant to be used in hand and not hammered. See Gomph catalog, pg 3. | 1.69.2937.JPG | strap end punch | wood | brass | metal | Gomph

1.69.2917
Gomph | bevelling tool | woo...
add to galleryremove from gallery

1.69.2917 | L: 5.5 in, depth: 1.25 in | Gift of Mr. Victor Alexander, Jr. | on right side of metal tip: GOMPH/ 3 (read vertically) | Push Beveler. Metal-tipped end bent at a 45 (symbol for degree) angle attached to a wooden handle. Inscription on right side of metal tip. Used to bevel surface after cut has been made. Could be pushed, rather than hammered. See regular bevelers in Salaman, (underlined) Dict. of Leather Working Tools, pg. 197 | 1.69.2917.JPG | bevelling tool | wooden | metal | Gomph

1.69.2934
Gomph | strap end punch | wo...
add to galleryremove from gallery

1.69.2934 | L: 6 in, Diameter: 1 in | Gift of Mr. Victor Alexander, Jr. | on top front of metal vertically: 7/8 [horizontally]: GOMPH [back side of end]: "AB" | Strap end punch - half-round metal tipped, U-shaped head with sharp edge on end. Metal end is attached with brass ferrule to wooden handle. Inscription on top front of metal and back side of end. Meant to be used in hand and not hammered. | 1.69.2934.JPG | strap end punch | wood | metal | brass | Gomph

1.69.3548
Gomph | French edger | metal...
add to galleryremove from gallery

1.69.3548 | L: 6.5 in | Gift of Mr. Victor Alexander, Jr. | on neck: GOMPH/ 6 | Tool is a scooped head with center sharpened with two higher, smooth edges. | 1.69.3548.JPG | French edger | metal | wood | Gomph

1.69.3097
Gomph | punch, strap end | w...
add to galleryremove from gallery

1.69.3097 | L: 7.125 in, Diameter: 1.75 in | Gift of Mr. Victor Alexander, Jr. | on top of metal: 1 3/4 [horizontally:] GOMPH [on bottom of metal end:] AB | Strap end punch. Half-round U-shaped blade 1 1/2" long. Metal end of tool is attached to a dark, round, hard wood handle with a brass ferrule. Inscription on top of metal and on bottom of metal end. Meant to be used in hand and not hammered. See Gomph catalog, pg. 3. | 1.69.3097.JPG | punch, strap end | wood | metal | brass | Gomph

1.69.2856
Gomph | creaser | wood | met...
add to galleryremove from gallery

1.69.2856 | L: 5.25 in, depth: 1.25 in | Gift of Mr. Victor Alexander, Jr. | on metal tip: GOMPH [vertically]: 5 | Hard-wood rounded, handle; brass ferrule and metal end, curved tip. Tip is split in the middle - creating two ridges. Inscription on metal tip. See Gomph catalog, pg. 6. | 1.69.2856.JPG | creaser | wood | metal | brass | Gomph